DTC dvdrw 1008 and Win98--not able to burn (Full Version)

All Forums >> [In-House] >> FAQ



Message


BZ908 -> DTC dvdrw 1008 and Win98--not able to burn (1/18/2008 1:33:33 PM)

Hello.  I recently got an old 350mhz PII back up and running for someone with a fresh install of old Win98, a new 60 GB hard drive, 256 mb more RAM (for a total of 320), and a new DVD burner, a DTC dvdrw 1008.  However, there's a problem...  The burner, while Win98 will recognize it with a generic CD-ROM driver and will read discs without any trouble, I cannot get any of the freeware burning software I've downloaded so far to recognize the drive as a burner. 

The software I've tried: Express Burn and BurnOn.  I also tried Free Create-Burn ISO, but that wouldn't even run.

I bought the drive used and it didn't come with any software that had special drivers, writers or anything like that.  I didn't think I'd need them, maybe that's my mistake.

I've downloaded the most recent version of the motherboard's BIOS to see if it would help--but it did not. 

So, what should I do?  I think I have a copy of Roxio Easy CD Creator 5 lying around--maybe it will work better?  Do I not have a proper driver, or is it just hard to find burning software that recognizes this particular drive, or is it something else entirely? 

I do have another optical drive in there, the original DVD-ROM drive that came with the computer (surprising that it came with a DVD-ROM drive as this computer was bought in 98).  However, I made sure that the burner was set to master and the original drive to slave.  What else am I missing?




Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.015625