CD Architect fails to burn CD (Full Version)

All Forums >> [Optical Storage Software] >> CD/DVD Authoring



Message


balaskumar -> CD Architect fails to burn CD (1/27/2006 8:55:26 PM)

I have a Dell Dimension 4700 with a NEC ND-3530A DVD/CD RW drive. I am trying to burn audio CD's using a combination of Sony's SoundForge 8.0 and CD Architect 5.2. The actual CD burn by CD Architect keeps failing withe following error message:

'SFMMCX'-(17)
'atapi'-(0)
-'_NEC DVD+-RW ND-3530A 102B'-(1)
Module sfmmcx.cpp Line 1807
A medium error occurred.
A write error occurred. Make sure your media is approved for this drive.
Status: 00020202
Command: 2a 00 00 00 0c b8 00 00 1a 00
Sense: 03 0c 00
Info: 00 00 0c b9
Specific: 00 00 00
Extra: 00 00 00 00 00 00 00 00 00 00

--- end of message
This happens after the CD lead-in has been burned but after only 2% of the CD contents have been written. I have tried writing at both max speed (48x) and 24x - they both fail the same way. I have used 2 types of media (Memorex Music CD-R as well as Sony Music CD-R) with the same results. On the other hand, other programs such as RecordNow seem to have no problem burning CD's and DVD's using this drive. I would appreciate any help you can give me in solving this problem.




Antonio -> RE: CD Architect fails to burn CD (1/28/2006 5:31:46 AM)

I would suggest the most recent firmware for your burner and Nero.[:)]




emperor -> RE: CD Architect fails to burn CD (1/31/2006 3:52:50 AM)

try to upgrade your firmware




Clint -> RE: CD Architect fails to burn CD (2/6/2006 4:40:06 PM)

quote:

A medium error occurred.
A write error occurred. Make sure your media is approved for this drive.

The error message indicates not a software failure, but incompatible/bad media and/or drive compatibility. Try different, NEC recommended media from quality manufacturers such as Taiyo Yuden, Verbatim/MCC/MKM, Maxell, Ricoh etc...




ShanoCommando -> RE: CD Architect fails to burn CD (8/22/2007 5:04:37 PM)

It's strange.   The same thing has just started happening to me.   I get this message:

'SFMMCX'-(17)
'atapi'-(1)
-'AOPEN DUW1608/ARR A060'-(0)
Module sfmmcx.cpp Line 1627
A hardware error occurred.
Unknown Additional Sense 91 00

Status: 00020202
Command: 2a 00 ff ff ff 6a 00 00 1a 00
Sense: 04 91 00
Info: 00 00 00 00
Specific: 00 00 00
Extra: 00 00 00 00 00 00 00 00 00 00 00 00 00 00



The weird part is I've never had a problem with it before.   I've been using it
for the past year successfully.   My CD burner still works with other software
like Nero and general burning.   Just not with CD architect.

I will try updating my firmware.   I'm hoping this is the solution.




DivaPlusSizes -> RE: CD Architect fails to burn CD (6/8/2013 5:33:38 AM)

I use Sony CD Arch 5.2 Version 5.2d (Build 240)
error occurred when burning compilation disc

a driver hardware error has occurred.


'SFMMCX'-(17)
''-(255)
-'HL-DT-ST DVDRAM GE24LU20 OL00'-(255)
Module sfmmcx.cpp Line 2151
A hardware error occurred.
A tracking servo failure occurred.

Status: 00020202
Command: 2a 00 00 04 c6 54 00 00 1a 00
Sense: 04 09 01
Info: 00 00 00 00
Specific: 00 00 00
Extra: 00 00 00 00 00 00 00 00 00 00

please advise,




Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
1.367188E-02