nec nd6500a dl burning (Full Version)

All Forums >> [Optical Storage] >> Firmware >> NEC



Message


rookie7 -> nec nd6500a dl burning (4/12/2005 4:57:30 AM)

hi
I flashed my drive from the 6450 to 6500a.
It worked, roxio reported the drive as nec nd6500a with dl capabilities.
When I tried to burn a data disc with roxio media center it said burn as read only .
So I checked the read only box, but then it reported an error : Cannot write medium, incompatible format, illegal request (05/30/05)
the disc is a dvd dl ritek 2.4x 8.5gb disc, is there a problem with the drive or the disc?




emperor -> RE: nec nd6500a dl burning (4/12/2005 11:57:16 AM)

how about using the latest NEC 6500A firmware? I am not very sure which Roxio versison you tested, does it support DL burning?




MP3Mogul -> RE: nec nd6500a dl burning (4/12/2005 8:23:17 PM)

I burned 2 dual layer verbatim discs today with Nero and the 6500A, no problem. I used firmware 2.81.




rookie7 -> RE: nec nd6500a dl burning (4/13/2005 4:48:53 AM)

its roxio easy media creator 7, and the firmware version is 2.23, but I read somewhere that dl ritek discs have problems.
whats the latest firmware for the drive?




emperor -> RE: nec nd6500a dl burning (4/13/2005 12:38:54 PM)

2.24 or 2.N0




rookie7 -> RE: nec nd6500a dl burning (4/16/2005 11:31:26 AM)

I have upgraded to 2.24 from 2.23 and still the same message , I even tried changing the dl disc to verbatim, it did'nt help still the same message.
Any Ideas?




rookie7 -> RE: nec nd6500a dl burning (4/16/2005 7:43:25 PM)

I have now purchased verbatim DL media and changed the firmware to 2.no ,I have also tried re-installing my roxio burning software but still the same message!
The computer is a HP dv series 1.8 Mhz centrino(Dothan), 1gig RAM.
Roxio recognizes the drive as having DL capabilities.
I work in South Korea and I bought the notebook here.




rookie7 -> RE: nec nd6500a dl burning (4/16/2005 8:41:19 PM)

I tried burning with nero 6.6.0.12 it also says burn process failed here is the log.


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.N0 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 2.N0 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 990MB (1014192kB)
Free physical memory: 501MB (513524kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.4.2005
ISO compilation
9:04:41 AM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:04:41 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

9:04:41 AM #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+-RW ND-6500A running

9:04:41 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:04:41 AM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

9:04:42 AM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4071839 (904:51.14, 7952MB)

9:04:42 AM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

9:04:42 AM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD+R9 Double Layer

9:04:42 AM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:04:42 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4071840 (4071840) = #4071840/904:51.15
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4071840 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------

9:04:43 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8339128320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4071840 | lead-out | 1 | 0x41 | 0x00

9:04:43 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:04:45 AM #13 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

9:04:45 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:04:45 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

9:04:45 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:04:45 AM #17 Text 0 File DVDPlusDualLayer.cpp, Line 430
Disc finalized, LBA total Image size: 4071840 (7952MB), Last LBA L0: 2035935 (3976MB)

9:04:45 AM #18 Text 0 File DVDPlusDualLayer.cpp, Line 519
L0 Data Zone Capacity set to 2035936 (1F10E0h, 3976MB) -> OK, confirmed setting

9:04:45 AM #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 544
Burning Layer 1

9:04:45 AM #20 Text 0 File DVDPlusDualLayer.cpp, Line 552
Start writing layer 1 at address 0 (0h)

9:04:45 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06F00600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

9:04:45 AM #22 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in EEPROM, command version 2

9:04:45 AM #23 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in EEPROM, command version 2

9:04:45 AM #24 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in EEPROM, command version 2

9:04:45 AM #25 Text 0 File DVDR.cpp, Line 5071
Drive: _NEC DVD+-RW ND-6500A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

9:04:45 AM #26 CDR -1207 File DVDR.cpp, Line 4777
Book Type automatically set to: DVD-ROM

9:04:45 AM #27 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes

9:04:49 AM #28 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x068B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

9:04:49 AM #29 CDR -1046 File Writer.cpp, Line 311
Illegal disc

9:04:49 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:04:49 AM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:04:49 AM #32 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

9:04:49 AM #33 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

9:04:49 AM #34 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

9:04:49 AM #35 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

9:04:49 AM #36 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in RAM, command version 2

9:04:50 AM #37 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in RAM, command version 2

9:04:50 AM #38 Text 0 File DVDR.cpp, Line 5071
Drive: _NEC DVD+-RW ND-6500A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

9:04:50 AM #39 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 9:16:48 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/13/2005 11:05:05 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 2:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

HELP ME!!




emperor -> RE: nec nd6500a dl burning (4/17/2005 1:26:33 PM)

maybe your drive is damaged?




Pistala -> RE: nec nd6500a dl burning (5/19/2005 10:53:09 PM)

I have a same problem. 6450 upgraded to 6500, all software DVDinfopro and Nero shows DL capable but when I try it shows illegal disc and finishes the operation. I have all software versions updated Nero etc.It crashes right after it should burn Layer one. BTW Memorex +R DL.




JosieNutter -> RE: nec nd6500a dl burning (5/25/2005 4:01:32 PM)

I had similar problems with the 2.4x Dynex (Ritek) DL discs until I went from 2.02C to 2.03D.

Mine's an OEM(?) 6500a in a Dell Inspiron 700m.




Pistala -> RE: nec nd6500a dl burning (5/26/2005 1:54:18 AM)

I'm using the 2.4 upgrade firmware which works fine except DL. Maybe I should change the media... [8|]




Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.0625