Best writing quality without «it depends on» (Full Version)

All Forums >> [Optical Storage] >> CD, DVD, BD Drives >> Writing Quality



Message


hilander -> Best writing quality without «it depends on» (2/8/2005 9:24:53 PM)

Hello,
What DVD drive has the best writing quality.Let's say we have the best quality media and use the best quality speed.Rewritable and DL media are not important in this case.
I thought it was Plextor 712A but I am not sure now. In all computer magazines in my country, Plextor 712A is the best.
Thanks




Iggy -> RE: Best writing quality without «it depends on» (2/9/2005 4:07:27 AM)

The quality is a combination of the drive and the media. So it is not so absolute to tell. Currently there are many quality burners available in the market for BenQ, NEC, LG and Plextor.




emperor -> RE: Best writing quality without «it depends on» (2/9/2005 2:55:46 PM)

BenQ DW1620A is among the best burners when coming to writing quality with DVD+R media




wilson2888 -> RE: Best writing quality without «it depends on» (3/7/2005 7:30:28 PM)

yes, and NEC for both +/- R is good, but bad for reading!

and LG is good at +/- R, good at reading, but some medias are limited the burning speed, and lack of support!

Plextor is good, but 716A seems not as good as 712A!




kortik -> RE: Best writing quality without «it depends on» (3/8/2005 3:17:16 AM)

Plextor 716A w/1.04u firmware is excellent stuff.




MP3Mogul -> RE: Best writing quality without «it depends on» (3/8/2005 7:05:43 AM)

The 716A with it's new firmware, and pending 1.05 firmware is an outstanding writer.




kortik -> RE: Best writing quality without «it depends on» (3/9/2005 1:03:47 AM)

I dream maybe with just firmware Plextor can enable LightScribe. Does anybody know if its possible w/just a firmware.




MP3Mogul -> RE: Best writing quality without «it depends on» (3/9/2005 5:29:48 AM)

I suppose anything is possible, but this is not planned for Plextor.




rugger -> RE: Best writing quality without «it depends on» (5/6/2005 10:34:08 PM)

lightscribe isn't possible unless a drive is designed for it.

There is a special alignment hub on all lightscribe disks on the label side. A special peice of hardware is needed to track this lightscribe hub for positioning information. Without that hardware, no lightscribe can function.




Iggy -> RE: Best writing quality without «it depends on» (5/7/2005 4:25:56 AM)

Lightscribe for an existing model? I think this is impossible with just a firmware upgrade, however this is my personal opinion.[:)]




Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
1.171875E-02